Type 1 Crushed Concrete in London

A well-prepared sub-base provides the stability needed to support the surface installed above it. Type 1 crushed concrete is a recycled aggregate made from concrete recovered from construction and demolition projects, then processed into a graded material suitable for a range of domestic, commercial and groundwork applications.

Easy Concrete Services supplies Type 1 crushed concrete to homeowners, builders, landscapers, groundworkers, developers and commercial contractors throughout London and the surrounding areas. Available in bulk bags for smaller or access-restricted projects and as loose material for larger requirements, it provides a practical alternative to primary quarried sub-base aggregates.

The material typically contains crushed concrete ranging from larger angular particles down to fine material. When correctly installed and compacted, the different particle sizes interlock while the fines fill smaller voids, creating a dense and stable foundation beneath the finished construction.

Type 1 crushed concrete is widely used beneath driveways, patios, pathways, tracks, hard standings and selected road construction layers. It can also provide a practical working platform on active building sites or support temporary and permanent surfaces where a firm, load-bearing base is required.

Because it is a recycled product, the colour and visible composition may vary between loads. The material should be selected for its performance as a sub-base rather than its appearance, and the project specification should be checked where a particular grading or certified product is required.

Our experienced team can help you estimate the quantity needed and select the delivery option that best suits your project and site access.

Type 1 crushed concrete offers a practical way to create a stable sub-base while returning suitable construction material to productive use. Rather than relying entirely on newly quarried stone, recovered concrete is processed into an aggregate that can support a wide range of building and landscaping projects.

For driveways and parking areas, Type 1 crushed concrete can provide the compacted foundation needed to distribute vehicle loads beneath paving, asphalt or concrete. Patios, paths and garden buildings also benefit from a properly prepared sub-base that helps reduce movement and settlement after the finished surface has been installed.

The required depth will depend on the existing ground, expected loading and planned surface. Soft soil, organic material and poorly drained areas may require additional preparation before the aggregate is placed. Type 1 crushed concrete should then be installed in manageable layers and compacted thoroughly rather than tipped to the full depth and compacted only at the surface.

It is important not to confuse Type 1 crushed concrete with MOT Type 1 Roadstone. Both products may be used for similar sub-base applications, but Type 1 crushed concrete is produced from recycled construction material, while MOT Type 1 Roadstone is a separate primary aggregate product. The correct option should be selected according to the project specification, required grading and intended use.

Type 1 crushed concrete is also different from larger recycled fill materials such as 6F2. Its smaller graded particles and fines allow it to produce a tighter, flatter compacted layer, making it more appropriate for the final sub-base beneath many finished surfaces.

Easy Concrete Services takes a project-led approach rather than treating all recycled aggregates as interchangeable. By understanding the surface being installed, expected loading, required depth and site access, our team can help you choose the right quantity and arrange a delivery that supports efficient progress on site.